Allows installation of electronic 19" equipment (including computers) indoors on the wall. The cooling system provides correct air circulation due to delivering fresh air by DC fans controlled by FanMagic®. The FanMagic controller is supplied from one of the computers to be installed in cabinet (or from AC/DC adapter). The airflow is controlled depending on inner temperature.
The fans positions and their quantity and dimentions depend on operation conditions and are subject to coordinate. The fans with air filters and redundant air pressure provide effective dust protection. Hot air quits the chassis through ventilation holes and splits.

Allows installation of electronic 19" equipment (including computers) indoors. When building in wall you have to provide the cabinet with good ventilation. The ventilation holes are at the side and at the top. The air circulation is enforced by two DC cooling fans with speed control (one to the inflow and the other to the outflow). Both fans are equipted with air filters which prevent cabinet from dust penetration. The airflow volume sets in depending on cabinet inner temperature.

The cabinet consists of a welded body and a metal door of half cabinet height with tubular rubber gasket. Rear panel is attached to the cabinet by four screws.

Fan filters can be fastened inside the cabinet (flush-mounted), as shown on the photos, to be served from inside (including changing fans) or outside, to make it easier to attach to air ducts, only when they will be accessible for service from outside.