D34 19" 3U Rackmount chassis 545mm DEEP

There are two form factors of PSUs you can place in the chassis: 1) - regular 140х150х86mm, wide-used in PC and pedestal server, 2) - compact 198х122х85mm, used in rackmount 2U chassis manufactured by InPC. The D34 chassis allows to use up to 5 expansion slots of full height if a regular PSU has been installed. If the compact 2U PSU has been installed then 7 expansion slots can be used. You decide what type of PSU to use yourself, the chassis stays the same.

Form Factor 3U chassis support for extended ATX size (305x330mm) motherboard Dimensions Height: 132mm Width: 483mm Depth: 545mm Net weight: 10.5kg (PSU 400W); 8.3kg w/o PSU Expansion slots (full-height) depended on PSU: - 5x for regular 140х150х86mm PSU - 7x for compact 198х122х85mm 2U InPC PSU Drive bays - 4x fixed HDD bay. Extended up to 8 by additional fixed HDD cage 4HD34M - 2x CDD bay - 1x FDD bay with FDD cutout Front Panel LEDs: - Hard drive activity - Power - Alarm Buttons: - Reset - Power Detailed description System Cooling - 2x 120x120x25 2500RPM fans, 4.22m3 total - 1x PSU fan Operating Environment (System) Operating Temperature Range: +5~50º Power Supply PSU 350W 400W 460W 550W Input Voltage 220VAC 220VAC 100~ 240VAC  100~ 240VAC  +3.3V 22A 30A 27A 27A +5V 21A 28A 29A 29A +5V standby 2A 2A 2A 2A -5V 0.3A 0.3A 0.3A 0.3A +12V1 +12V2 18A 16A 18A 18A 16.5A 15A 18A 18A -12V 0.8A 0.8A 0.5A 0.5A Mounting in rack - Slide Rail Kit DR-3U-500 supplies with chassis, look at application notes Package Height: 170mm Width: 520mm Depth: 590mm Gross weight: 11.5kg (PSU 400W); 9.3kg w/o PSU Available Colors RAL7032 Beige     RAL9005 Black Ordering Information Part number Description Chassis color D34xxx-W D34xxx-B White(Beige) Black Power Supply D34350 D34400 D34460 D34550 D34A350 D34A400 D34A460 D34A550 350W regular 140х150х86mm PSU 400W regular 140х150х86mm PSU 460W regular 140х150х86mm PSU 550W regular 140х150х86mm PSU 350W compact 198х122х85mm 2U InPC PSU 400W compact 198х122х85mm 2U InPC PSU 460W compact 198х122х85mm 2U InPC PSU 550W compact 198х122х85mm 2U InPC PSU Optional Parts List Model Description 5.25" blank cover Z5D-W Z5D-B Z5-W Z5-B Double beige 5.25" more>> Double black 5.25" more>> Beige 5.25" more> Black 5.25" more>> 3.5" blank cover Z3L-W Z3L-B Beige 3.5" more>> Black 3.5" more>> 4xHDD cage 4HD34M 4xHDD shock-resistant fixed cage(holder) with snubbers. more>> FanMagic controller FanMagic, FanMagicX Internal airflow temperature monitoring and WatchDog timer. more>> Air filter F120 more>> Xeon CPU mounting plate EBP-604-3U Protects your motherboard from breakage more>> Сhassis with compact PSU – D34A Technical drawing of the D34 (with regular PSU) Technical drawing of the D34A (with compact InPC PSU) click to view large picture click to view large picture click to view large picture Documentation: Chassis Quick Reference  |  Safety instruction

PHOTOGALLERY
click to view large picture

The following Application Note describes the mechanical specification of the D34 chassis, especially accessibility to expansion slots and as following an ability of I/O card installation that is depended on the main factor - what type of PSU has been selected.

D34 has 7 expansion slots on its back side where I/O cards can be installed. However, only 5 of 7 expansion slots can be used if a regular (140х150х86mm) PSU has been installed. Picture at the left shows the situation when slot-1 and slot-2 cannot be used because of they have been hidden by PSU.

Regular PSU is wide-used in PC and pedestal server and has lower price in comparision with another special designed one. So, if your system does not use slot-1 or slot-2 it is reasonable to complete the D34 with regular PSU. For example, your system has to be powered 400W PSU and does not use neither slot-1 nor slot-2. In this case you can order the D34400 chassis (D34 with 400W PSU) or the D34 (without any PSU and install PSU yourself).

If a system has to use these slots then compact (198х122х85mm) 2U PSU should be installed (as shown on the picture below on the left). Otherwise, if your system uses either slot-1 or slot-2 you should order the D34A400 chassis. Keep in mind that compact (198х122х85mm) 2U PSU manufactured by InPC has uniqu mechanical specification and cannot be replaced by another 2U PSU. Compact (198х122х85mm) 2U InPC PSU can be ordered separately, but it is advisable to order chassis together with required PSU.

The chassis can be equipped additional cage 4HD34M. To realise it the chassis should not be modified or equipped by extra clamps. The 4HD34M cage is supplied as option. It is advisable to order the cage together with chassis.

Due to the weight of Xeon CPU heatsinks they must be secured to protect your motherboard from breakage. The D34 chassis does not have any correspoding mounting holes to support direct chassis attachment of Xeon CPU heatsinks. Use the optional part - EBP-604-3U Xeon CPU mounting plate in order to fasten Xeon socket LGA 604/771 CPU heatsinks with chassis. Detalied info

ATX motherboards have standardized mounting holes to fit different types of chassis. As to CPU heatsink mounting holes - they are not standardized. Determine and spot CPU heatsink mounting holes and then fix the EBP-604-3U plates by selfadhessive tape, glue or by tiny revets. Make shure that standoffs of the plates fit perfectly to the position of CPU heatsink mounting holes at the motherboard, otherwise the CPU heatsink screws would not align to the thread. Since, the plates must be installed prior to installing the motherboard into the D34 chassis, all operations expect pre-scheming and accuracy of the stuff.

The EBP-604-3U plate is supplied as option. It is advisable to order the plate together with chassis.

The DR-3U-500 Slide Rail Kit is supplied together with the D34 chassis. Remove the D34 chassis from the packaging box and check that the Kit is included. The Kit consists of two symmetric Holders - left and right. Each Holder consists of two parts - Front Bracket and Back Bracket. Slide together the front to back sections of the Holders as shown on the picture on the left. Extend the Holders to the length required to fit the rack or cabinet before you install it. Notify, there are two variants to join Back Bracket (A and B). Screw on appropriate nuts (supplied with the Kit) to each bracket, and tighten the front and the back sections.

Install 12 cage nuts in the rack (not supplied with the Kit). Note! Please make sure the salient side of each Holder (left and right) is in the opposite position in the rackmount. Reffer to the picture on the left. You should install 6 cage nuts (red marked) and tighten the both Holders with 4 appropriate screws for EACH SIDE of the rack (left and right, front and back). You need to tighten 8 screws total.

Slide the D34 based system along the pre-installed Holders in the suitable rack. Tighten the other 4 screws on the opposite side of the front panel where it attaches to the rack.