DL32 3U rackmount case: Just Cases

Just-Cases.com

| | | | |

DL32

19" 3U Rackmount chassis

485mm DEEP

Form Factor
3U chassis support for extended ATX size (305x330mm) motherboard
Dimensions
Height: 132mm

Width: 483mm

Depth: 485mm

Net weight: less than 9kg (PSU 400W); 7kg w/o PSU
Expansion slots (full-height)
- 5x
Drive bays
- 4x HDD bay. Extended up to 8x by additional fixed HDD cages (see Optional Parts List and Application Notes below) - 2x CDD bay - 1x FDD bay with FDD cutout
Front Panel
LEDs: - Hard drive activity - Power - Alarm Buttons: - Reset - Power	Detailed description

System Cooling

- 2x 92x92x25 2500RPM fans, 2.86m³ total
- 1x PSU fan

Operating Environment (System)

Operating Temperature Range: +5~50º

Power Supply

PSU	300W	350W	400W	460W	550W
Input Voltage	-48VDC	220VAC	220VAC	100~ 240VAC	100~ 240VAC
+3.3V	28A	22A	30A	27A	27A
+5V	30A	21A	28A	29A	29A
+5Vstandby	2A	2A	2A	2A	2A
-5V	0.3A	0.3A	0.3A	0.3A	0.3A
+12V1 +12V2	15A -	16A 16A	18A 18A	16.5A 15A	18A 18A
-12V	0.8A	0.8A	0.8A	0.5A	0.5A

Mounting in rack

- Slide Rail Kit, look at application notes

Package

Height: 170mm

Width: 520mm

Depth: 590mm

Gross weight: less than 10kg (PSU 400W); 8kg w/o PSU

Available Colors

RAL7032 Beige

RAL9005 Black

Ordering Information	Part number	Description
Chassis color	DL32xxx-W DL32xxx-B	White(Beige) Black
Power Supply	DL32 DL32300(48V) DL32350 DL32400 DL32460 DL32550	Without PSU 300W -36..72VDC input 350W 400W 460W 550W

Optional Parts List	Model	Description
5.25" blank cover	Z5D-W Z5D-B Z5-W Z5-B	Double beige 5,25" more>> Double black 5.25" more>> Beige 5.25" more> Black 5.25" more>>
3.5" blank cover	Z3U-W Z3U-B	Beige 3.5" more>> Black 3.5" more>>
2xHDD cage	2HD26	2xHDD drive holder. more>>
3xHDD cage	3HD32	3xHDD drive holder. more>>
3xHDD cage	3HDM24	3 x 2.5" HDD drive cage more>>
FanMagic controller	-	Internal airflow temperature monitoring and WatchDog timer. more>>
Air filter	F92	more>>
Xeon CPU mounting plate	EBP-604-3U	Protects your motherboard from breakage more>>

Сhassis DL32 with 4 HDD two - on the bottom and two - upside down on the holder	Technical drawing of the DL32

click to view large picture	click to view large picture

Documentation:

Chassis Quick Reference | Safety instruction

PHOTOGALLERY
click to view large picture

HDDs bays extention by additional 2HD26 or 3HD32 cages

click to view large picture

Apply additional cages 2HD26 - for two HDD or 3HD32 - for three HDD,
if you want to install more than 4 HDD in the chassis. There are two places for fastening cages - on the holder like HDD. So you can place up to 8 HDD in the chassis (2 HDD - on the buttom of chassis and two cages 3HD32 with three HDD both - on the holder). The cages 2HD26 and 3HD32 are supplied as options. It is advisable to order them together with chassis.

EBP-604-3U Xeon CPU mounting plate installation

click to view large picture

Due to the weight of Xeon CPU heatsinks they must be secured to protect your motherboard from breakage. The DL32 chassis does not have any correspoding mounting holes to support direct chassis attachment of Xeon CPU heatsinks. Use the optional part - EBP-604-3U Xeon CPU mounting plate in order to fasten Xeon socket LGA 604/771 CPU heatsinks with chassis.

Detalied info

ATX motherboards have standardized mounting holes to fit different types of chassis. As to CPU heatsink mounting holes - they are not standardized. Determine and spot CPU heatsink mounting holes and then fix the EBP-604-3U plates by selfadhessive tape, glue or by tiny revets. Make shure that standoffs of the plates fit perfectly to the position of CPU heatsink mounting holes at the motherboard, otherwise the CPU heatsink screws would not align to the thread. Since, the plates must be installed prior to installing the motherboard into the D34 chassis, all operations expect pre-scheming and accuracy of the stuff.

The EBP-604-3U plate is supplied as option. It is advisable to order the plate together with chassis.

Slide Rail Kit installation

click to view large picture

The Slide Rail Kit is supplied together with the DL32 chassis. Remove the DL32 chassis from the packaging box and check that the Kit is included. The Kit consists of two symmetric Holders - left and right.

Install 8 cage nuts in the rack (not supplied with the Kit). Note! Please make sure the salient side of each Holder (left and right) is in the opposite position in the rackmount. Reffer to the picture on the left. You should install 4 cage nuts (red marked) and tighten the both Holders with 4 appropriate screws for EACH SIDE of the rack (left and right). You need to tighten 4 screws total.

Slide the DL32 based system along the pre-installed Holders in the suitable rack. Tighten the other 4 screws on the opposite side of the front panel where it attaches to the rack.

| | | |