| Input Specifications |
• Voltage:
|
220-240VAC |
| • Frequency: |
47 Hz to 53 Hz |
| • Input current: |
4 amps maximum / 230 Vrms, 50Hz |
| |
| Output Specifications |
| • Over-voltage protection: |
+3.3V (4.6V max.), +5V (6.5V max.),
12V1 (15.5V max.), 12V2 (15.5V max.) |
| • Over-current protection: |
+3.3V (75.0A max.), +5V (56.0A max.),
+12V1 (25.0A max.), +12V2 (30.0A max.) |
| • Short circuit protection: |
The power supply is prevented from output over current. |
| • Remote ON/OFF control: |
The power supply shall accept a logic open collector level which
will disable / enable all output voltage (excluding +5V standby). |
| • Power good signal: |
230V (full load) : 100 - 500 ms |
| |
| General Specifications |
• MTBF:
|
100K hours at 25°C |
| • Efficiency: |
70% min. |
| • Hold-up time: |
12.0ms minimum at 230V/50Hz. |
| |
| Environmental Specifications |
• Operating conditions:
|
ambient temperature 0°C~50°C, 90% RH |
• Storage and
shipping conditions: |
ambient temperature -20°C~65°C, 95% RH |
| • Dielectric strength: |
primary to frame ground 1800 VAC for 1 second,
primary to secondary 1800 VAC for 1 second |