|
|
|
|
 |
Dimension
: 175.6 x 84.6 x 70.5 mm |
| |
|
|
Application
: For PC |
| |
|
|
Watt
: 250 |
| |
|
|
PFC
: Passive |
| |
|
|
 |
Safety |
|
|
|
|
|
Features |
|
| |
- High efficiency
- Low ripple & Noise
- Output over voltage protection
- Short circuit protection on all output
- 100% burn-in under high ambient temperature (50°C)
- Vacuum-impregnated transformer
- MTBF: 100K hours at 25°C
- 100% Hi-pot tested
- Line input fuse protection
- With 8cm fan
|
|
|
|
|
Specifications |
|
| |
- Remote ON/OFF Control: The Power supply shall accept a logic open
collector level which will disable /enable all out put voltage
(excluding +5V standby).
- Temperature range: operating 0°C~50°C storage-20°C~+65°C
- Temperature coefficient: 0.01%°C
- Transient response: output voltage recovers in less than 1 ms max. following a 25% load change
- Hold-up time: 17.0 mS minimum at 115V / 60 Hz.
17.0
mS minimum at 230V / 50 Hz.
- Dielectric withstand: input / output 1800VAC for1 second, input to frame ground 1800VAC for 1 second
- Humidity: 5~95% RH
- Efficiency: 65% min. at full load
- Power good signal: turn-on delay 100ms to 500ms
- Over current protection
- Over voltage protection: +5V +3.3V +12V
- Short circuit protection
- Voltage: 115 / 220-230 VAC (Without PFC)/ 220-230VAC (With PFC)
- Frequency: 47Hz to 63Hz
- Input current: 6 amps maximum / 115 Vrms
3
amps maximum / 230 Vrms
- Inrush current: 50 amps cold, 80 amps warm measured at 230 Vrms
|
|
|
|
|
Output |
|
| |
| Output Voltage |
Min. load |
Max. load |
Load Reg. |
Ripple & Noise | | +5Vsb | 0.1A | 2.0A | +-5% | 50mV P-P | | -12V | 0.0A | 0.3A | +-10% | 120mV P-P | | +12V2 | 1.0A | 12.0A | +-5% | 120mV P-P | | +12V1 | 1.0A | 6.5A | +-5% | 120mV P-P | | +5V | 1.5A | 18.0A | +-5% | 50mV P-P | | +3.3V | 0.5A | 17.0A | +-5% | 50mV P-P | |
|
|
|
．+3.3V & +5V total output shall not exceed 115W.
|
|
|
|
|
|
 |
| * Detailed specifications and
drawings provided upon request. |
|
|
|
|
|
|
|
|
|